
Unequivocal GC/TQ intelligence and diagnostics
7010C Triple Quadrupole GC/MS
New advanced GC/TQ intelligence includes SWARM autotune that finishes twice as fast as previous generations, new data acquisition modes like triggered MRM (tMRM), simultaneous dynamic MRM and scan (dMRM/scan), and diagnostic tools that minimize instrument downtime. Method development and method migration from the Agilent 5975 or 5977 GC/MSD is fully automated and easy to perform with the MassHunter Optimizer for GC Triple Quad.
- GC/MS Instruments
Product Details
- The high-efficiency ion source (HES) delivers confident ultratrace-level analysis even in complex matrices, and the Agilent JetClean self-cleaning ion source reduces or even eliminates the need for manual source cleaning
- The Agilent Reference Compound Introduction Valve enables easy analysis of environmental dioxins, while meeting the requirements and strict method detection limits of the EPA-approved alternative testing procedure
- Data acquisition modes like data-dependent tMRM and simultaneous dMRM and scan mode enable targeted screening with confident quantitation of hundreds of analytes in a single run
- Twice as fast SWARM autotune with incorporated diagnostic features pairs with the built-in intelligence of the 8890 and Intuvo GCs for improved system diagnostics and simplified access to powerful operations through an integrated touch screen and browser interface
- A heated gold quadrupole, triple-axis HED-EM detector, and fast venting enhance the performance of the mass spectrometer by reducing neutral noise and instrument cool-down time
- Agilent MassHunter software delivers complete control from tune to data analysis and report generation, streamlining your workflow
- MassHunter Optimizer software easily transfers GC/MSD methods to GC/TQ and uses retention time locking software to reproducibly transfer methods between GC systems
- Built-in technical controls combined with procedural controls ensure the security of your data, control access, and facilitate compliance as defined by US FDA 21 CFR Part 11, EU Annex 11, and similar national electronic record regulations
- The Agilent Pesticides and Environmental Pollutants 4.0 Database contains over 1,100 compounds with multiple transitions per compound and over 7,500 matrix-optimized MRM transitions, helping you build acquisition methods that reduce matrix interferences
- To enable a better-informed, sustainable choice, Agilent has partnered with My Green Lab to have the 7010C GC/TQ independently audited for their Accountability, Consistency, and Transparency (ACT) label
Detector |
|
Dimensions (WxDxH) |
|
GC/MSD Method Compatibility |
|
IDL Sensitivity (positive) |
|
Ion Source |
|
JetClean Compatibility |
|
MRM Speed |
|
Mass Range |
|
Minimum MRM Dwell Time |
|
Mode of Operation |
|
QuickProbe Compatibility |
|
Scan Speed |
|
Software Platform |
|
Discover the possibilities with our industry-leading solutions for gas chromatography/mass spectrometry
Our next-generation GC/MS instruments continue to build on more than five decades of innovation and industry leadership. With the latest Agilent 5977C GC/MSD and 7000E and 7010C triple quadrupole GC/MS instruments you consistently get the highest-quality results for your business.
Learn MoreGas Chromatography Mass Spectrometry (GC-MS) Information
What is GC-MS? GC/MS combines two analytical tools to identify and measure the concentration of chemicals found in foods, consumer products, pharmaceuticals, fuels, the environment, and more.
Read on to learn more about the typical components of a GC/MS instrument and its basic principle of operation.
- Application Notes
-
Quantitation of over 1,000 Pesticide Residues in Tomato
A comprehensive multiresidue workflow was developed and validated for the simultaneous quantitation of over 1,000 pesticide residues in tomato to accelerate and simplify routine laboratory food testing.
- Application Notes
- English
- 07 Nov 2023
- 772.52 KB
Quantitation of 341 Pesticide Residues in Tomato According to SANTE 11312/2021 Guidelines
A comprehensive, quantitative GC/MS/MS workflow using the Agilent 8890 GC and 7010C triple quadrupole GC/MS for the quantitation of 341 pesticide residues in tomato.
- Application Notes
- English
- 13 Oct 2023
- 998.16 KB
Hydrogen Carrier Gas for Analyzing Pesticides in Pigmented Foods with GC/MS/MS
Hydrogen carrier gas for analyzing pesticides in pigmented foods with 8890/7000E and 8890/7010C GC/TQ systems GC/MS/MS.
- Application Notes
- English
- 08 Sep 2023
- 3.55 MB
A Fast and Robust GC/MS/MS Analysis of 203 Pesticides in 10 Minutes in Spinach
This application note describes two approaches for achieving robust, multiresidue pesticide analysis in 10 minutes by GC/MS/MS.
- Application Notes
- English
- 07 Feb 2023
- 5.07 MB
Dynamic MRM/Scan Mode, Sensitive Quantitation in Complex Foods by GC/TQ
Dynamic MRM/Scan Mode: Adding More Confidence to Sensitive Quantitation of pesticides in Complex Foods by Triple Quadrupole GC/MS (GC/TQ)
- Application Notes
- English
- 21 Sep 2022
- 2.79 MB
Max Performance in GC/MS/MS Analysis of 200 Pesticides in Challenging Food Matrices
Keys to performance in analysis of 200 pesticides in challenging food matrices using sample preparation and Agilent 8890/7000E and 8890/7010C triple quadrupole GC/MS
- Application Notes
- English
- 13 Sep 2022
- 3.19 MB
Pesticide Analysis in Kale Using the High Pigment dSPE with Carbon S and GC/MS/MS.
This application note focuses on the quantitation of over 100 pesticides in kale by GC/MS/MS and the Agilent Bond Elut QuEChERS High Pigment dSPE with Carbon S.
- Application Notes
- English
- 15 Jul 2022
- 2.20 MB
- Brochures
- Posters
- FAQs
-
Instrument Detection Limit Frequently Asked Questions (FAQ)
An Introduction to Using Instrument Detection Limit as a Performance Metric
Didn't find what you need? Contact our support team.
Videos
Recent Advances in the Routine Analysis of Dioxins in Food and Environmental Samples
In this webcast we will present how we implemented triple quadrupole GC–MS for the routine analysis of dioxins in environmental and food samples according to EPA and SANTE guidelines. We will discuss technological advances like a high efficiency source, allowing routine testing labs to easily meet regulatory performance criteria set by USEPA 1613 for environmental samples and EU 644/2017 for food samples. Further, we will discuss how the use of hydrogen carrier gas can significantly reduce lab operating costs compared to helium while still meeting regulatory limits of detection.
7010C GC/TQ receives ACT label from My Green Lab
Independently audited by SMS Collective, LLC (SMSC), and published by My Green Lab, the ACT label from My Green Lab provides information about the environmental impact of the product throughout its life cycle. My Green Lab is a nonprofit dedicated to improving the sustainability of scientific research.
- 18 May 2022