The Agilent 4100 ExoScan FTIR handheld analyzer accurately measured release agent on a CFRP panel in a fully nondestructive manner.
Measure the cure level of an epoxy fiber reinforced polymer in less than 30 sec using a handheld FTIR
A hand-held 4300 FTIR plus a multi-variate calculation was able to accurately and quickly quantify the component wet mix-ratio of a paint applied by a spray gun
ATR, Diffuse Reflectance and 45 degree specular reflectance FTIR spectroscopy measurements were compared for paint, concrete and rock samples.
The Agilent 4100 ExoScan handheld FTIR system with DRA was used to measure the quality of coal samples.
Infrared spectroscopy provides a means of measuring contamination on composite surfaces. The unique infrared signature of both hydrocarbons and silicones allows them to be..
Demonstrating the use of the handheld, non-destructive Agilent 4100 ExoScan FTIR with germanium ATR sample interface.
Application note for identification and evaluation of coatings using hand-held FTIR
Application note for the detection of trace contamination on metal surfaces using the handheld Agilent 4100 ExoScan FTIR
Application note for composite thermal damage – correlation of short beam shear data with FTIR spectroscopy
MicroLab PC Software Site Preparation Checklist
4300 FTIR Hardware Site Preparation Checklist
0 part selected.