8890 GC System
8890 GC System
Built-in intelligence enables remote connectivity. The autonomous, user-initiated system checks system health, alerting you to potential issues and how to solve them. Step-by-step instructions on common maintenance procedures and sixth generation EPC for autonomous diagnostic tests.
- GC Systems
Product Details
- The browser interface provides remote connectivity enabling you to monitor your GC system, check system logs, and perform diagnostics tests, from inside, as well as outside, the laboratory.
- The full-function touch screen gives a visual report of the system configuration letting you update methods and sequences, perform maintenance routines, and check instrument status.
- Built-in intelligence autonomously monitors the health of the system, alerts the user of potential issues before they affect chromatographic performance, and offers helpful step-by-step guides to resolve issues.
- Unique 6th-generation microchannel-based EPC architecture provides a significant improvement in reliability and longevity against gas contaminants such as particulates, water, and oils, extending the life of the instrument consumables.
- Capillary Flow Technology (CFT) provides unique gas flow connections for multidimension gas chromatography (GC x GC/Deans Switch), comprehensive two-dimension gas chromatography (GC x GC) with flow modulation, and backflush at the beginning, middle, or end of an analytical column that are oven mountable and very low thermal mass.
- Single filament TCD that doesn’t require a separate reference gas, or manual potentiometer adjustment, yet provides a stable baseline with a minimal amount of signal drift commonly seen with valve switching.
- Autoranging FID provides the ability to detect and quantitate from percent levels to parts per billion (ppb) in a single injection.
- Compatible with all GC/MS platforms
- Sulfur or nitrogen chemiluminescence detector provides low ppb detection, equimolar response, and quantitation for sulfur or nitrogen contaminants without quenching from matrix.
- Cost-saving advanced electronic pneumatic controllers such as Helium Conservation Module, Hydrogen Sensors, and Alternate Carrier Gas Solutions, dramatically reduce the amount of helium used offering both flexibility and higher levels of safety in your laboratory.
- Optional Smart ID Keys, included with GC columns, provide information such as column usage with default parameters for configuration that helps automate method setup.
GC Intelligence
Built-in GC Intelligence that enables you to work smarter with autonomous monitoring, remote connectivity, and other time saving operations.
Learn MoreRetention Time Locking (RTL)
Retention time locking (RTL) provides the same retention time on one Agilent GC or GC/MSD system to those on another like system with the same nominal column.
Learn More- Application Notes
-
Analysis of Wastewater Effluent Samples to Identify Toxic Chemicals Using the High-Resolution Agilent 7250 GC/Q-TOF
This study utilized a workflow for broad-scope suspect screening to identify toxic chemicals in wastewater effluents.
- Application Notes
- English
- 18 Sep 2020
- 2.29 MB
EPA 8270E with Pulsed Split Injection and Retention Time Locking on an 8890 GC with a 5977 Series MSD
GC/MS method for 8270E/Semivolatiles
- Application Notes
- English
- 06 May 2020
- 1.35 MB
Combined Analysis of N-Nitrosodimethylamine (NDMA) and N-Nitrosodiethylamine (NDEA) using the Agilent 7697A Headspace Sampler, 8890 GC System, and 5977 GC/MSD
Describes the use of the Agilent 8890 GC to analyze impurities in sartan products according to a United States Food and Drug Administration (US FDA) method.
- Application Notes
- English
- 04 Mar 2020
- 347.09 KB
Determination of Benzene and Toluene in Gasoline by ASTM D3606 on an Agilent 8890 GC with Capillary Columns
GC method for determining benzene and toluene in gasoline
- Application Notes
- English
- 19 Dec 2019
- 607.60 KB
Determination of Volatile Organic Compounds in the Cabins of Vehicles by Agilent 8890 GC/5977B MSD andd Thermal Desorption Sampler
A TD/GC/MSD method for VOC in vehicles
- Application Notes
- English
- 17 Dec 2019
- 403.10 KB
Analysis of USP <467> Residual Solvents of Class 1, Class 2, and Class 3 using the Agilent 8890 GC/ FID /5977B MSD System
A GC/FID/MSD method for the residual solvents.
- Application Notes
- English
- 12 Dec 2019
- 1.19 MB
Analysis of Polychlorinated Biphenyls on 8890-5977B GC/MSD by Following the China HJ 743-2015 Method
Performance assessment of 889-5977B platform on the analysis of 18 indicator PCBs in soil
- Application Notes
- English
- 02 Dec 2019
- 736.87 KB
System Suitability for cis-trans FAMEs Analysis by AOAC 2012.13 on an Agilent 8890 GC
This application note demonstrates analysis of fatty acid content in milk following AOAC Method 2012.13 on an 8890 GC system
- Application Notes
- English
- 18 Nov 2019
- 773.01 KB
Analysis of Organophosphorus and Organochlorine Pesticides in Fruit and Vegetables Using an Agilent 8890 GC with Four Detectors
Analysis of organophosphorus and organochlorine pesticides in fruit and vegetables using an Agilent 8890 GC system with dual-ECD and dual-FPD detectors.
- Application Notes
- English
- 09 Oct 2019
- 1.50 MB
Contaminants Screening Using High-Resolution GC/Q-TOF and Expanded Accurate-Mass Library of Pesticides and Environmental Pollutants
Describes a workflow for strawberry extract analysis using a recently updated GC/Q-TOF accurate-mass library of pesticides and environmental contaminants.
- Application Notes
- English
- 02 Oct 2019
- 2.93 MB
- Brochures
- Flyers
- Posters
- Support
-
GC Firmware Update Tool
This is the GC/ALS/HSS Update Utility
- Firmware
- English
- 04 Aug 2020
- 108.75 MB
- EXE
8890 GC Firmware 2.1.0.626
8890 GC Firmware version 2.1.0.626 (Requires GC Firmware Update Utility to install)
- Firmware
- English
- 30 Jul 2020
- 1876.88 MB
- GPG
- Quick Reference Guides
- Site Preparation Checklists
- User Manuals