Skip to main content

The New Cary 3500 UV-Vis

Multiply Your Experimental Capabilities

NEW Agilent Cary 3500 UV-Vis

Transform your laboratory

Running more than one experiment at a time.
Doing simultaneous calibrations and sample measurements.
Performing thermal analysis at faster temperature ramp rates.

The new Agilent Cary 3500 UV-Vis makes it all possible.

Designed from the ground up, this innovative system will streamline your experimental design and amplify confidence in your results.

Agilent Cary 3500 UV-Vis

Measure samples at four temperatures, simultaneously

Perform four experiments in one

The Cary 3500 Multizone UV-Vis has no moving parts, and allows up to four temperature zones to be configured. What’s more, each pair of cuvettes can be held at a different temperature—so you can do four experiments at once.

Here’s an example of how you can dramatically reduce analysis time: View application note

Temperature ramping, transformed

Confidence at any temperature ramp rate

Ramp at up to 30 °C/min, and improve accuracy and reproducibility. These plots show that the melting temperature of siRNA is not impacted by the ramp rate.

See how you can achieve the same results in a fraction of the time: View application note

Measure calibration standards and samples, simultaneously

Create a standard curve and measure samples in less than 1 second

Measure your standards and sample concentrations at the same time, and under the same conditions—amplifying confidence in your results.

Find out how to reduce the time it takes to quantify low-volume, highly absorbing samples: View application note

UV-Vis Optimum Parameters poster


Get this handy reference guide to the right solvents and instrument parameters to use for your UV-Vis measurements.

Request poster

Cary 3500 UV-Vis brochure


Take a closer look at the first full-scale UV-Vis redesign in decades.


Complete this form to receive your UV-Vis Optimum Parameters poster.

Learn more