This set contains firmware files for all Agilent LC modules and corresponding documents. Revision changes are documented in the included Firmware Bulletin.

• 1120 Compact LC
• 1100 Series LC
• 1200 Series LC
• 1220 Infinity LC System
• 1260 Infinity LC System
• 1290 Infinity LC System
• 1260/1290 Infinity II LC System
• 1260/1290 Infinity III LC System
• G7100A Capillary Electrophoresis

Upgrade ALL existing modules to latest version if

• a new LC module is added to the existing system (recommended)
• one of the existing modules requires an upgrade due to a bug fix solved with the latest release.

NOTE: DO NOT use 7.01/7.02/7.1x/7.2x/7.3x versions when a newer version for the module is available!

For firmware update procedures/tools refer to the Tools & Procedures.

This set includes just the latest firmware of each module. It's fully compatible with your CDS that supports this firmware set.

Agilent LC Firmware Set Interoperability and Support Statement:

• Agilent releases LC firmware in sets for modules, which have been tested for interoperability. A set typically covers a range of firmware revisions, e.g. A/B/C/D.07.xx with variable values for xx.
• All Agilent LC instrument firmware sets have been designed and tested to be fully backward compatible to Agilent chromatographic data systems (CDS)
• The module firmware in each set is fully compatible and interoperable with firmware for all other modules in the same set.
• Firmware of different modules is linked, e.g. between host modules (B/D-firmware) and hosted modules (C-firmware). When upgrading firmware within a set, all modules in a system must be updated to the current firmware revision within that set.
• Agilent recommends keeping the LC instrument firmware always current in order to include latest improvements and bug fixes.
• Do not mix firmware revisions between different sets. Agilent does not guarantee mixed firmware revisions from older or newer sets.
• For documentation of firmware revisions (e.g. in customer SOPs) the term "Revision XXX or later" or "Firmware from Set XXX or later" should be preferred instead of enforcing a specific firmware revision in order to allow applying bug fixes without a need for revalidations.
• Specific minimum firmware requirements for new LC/CE Driver release(s) are documented in the corresponding LC/CE Driver release notes.

Notes for Agilent LC instruments controlled by non-Agilent Chromatography Data Systems (CDS):

• Agilent Firmware is compatible with LC Drivers and its corresponding the ICF version when Agilent LC Firmware rules are applied.
• Many Non-Agilent software vendors are following the Agilent firmware guidelines. Please check the Non-Agilent Support layer documentation provided by the software provider, if the Non-Agilent software applies own firmware rules.

Compatibility and Emulation Mode

OQ/PV after FW upgrade

Download Information