RF coil grounding bracket, used with series 7700 and 8800 ICP-MS systems, models 7700e, 7700s, and 7700x

Interface wrench for Sampling cone for Agilent ICP-MS. Used to remove tightly bound sampler cone, suitable for 7700, 7800, 7850, 7900, 8800, 8900

• Unit:

  1 Each

Omega bias lens for x-lens of Agilent 7700x/e, 7800, 7850 and 8800 ICP-MS. Stainless Steel omega bias lens for x-lens of Agilent 7700x/e, 7800, 7850 and 8800 ICP-MS

• Unit:

  1 Each

Pre-filter alignment jig, used with all series 7700 ICP-MS systems

Plastic latch fitting, for top covers, used with series 7700 and 8800 ICP-MS systems, models 7700e, 7700s, and 7700x

Retaining ring for sampling cone, Agilent 77/78/79/88/8900 series ICP-MS. Replace if is difficult to thread onto interface or out of shape.

• Unit:

  1 Each

Plastic screw for spray chamber bracket, used with series 7700, 7900, and 8800 ICP-MS systems, models 7700e, 7700s, and 7700x

Plug for dilution port, 4 mm, for 7700 ICP-MS. PTFE plug for the dilution gas port on the Agilent 7700 ICP-MS connector tube between the spray chamber and torch.

• Unit:

  1

Sample grounding pin, used with series 7700, 7900, and 8800 ICP-MS systems, models 7700e, 7700s, and 7700x

ORS cell entrance lens for Agilent 7700 and 8800 ICP-MS. Replacement cell entrance lens on Octopole Reaction System cell for Agilent 7700 and 8800 ICP-MS

• Unit:

  1 Each

Deflect lens for Agilent 7700 and 8800 ICP-MS. Replacement deflect lens for Agilent 7700 and 8800 ICP-MS

• Unit:

  1 Each

ORS cell focus lens for Agilent 7700 and 8800 ICP-MS. Replacement cell focus lens on Octopole Reaction System cell for Agilent 7700 and 8800 ICP-MS

• Unit:

  1 Each

Omega bias lens for s-lens of Agilent 7700, 7900 and 8800 semiconductor ICP-MS. Stainless Steel omega bias lens for s-lens of Agilent 7700, 7900 and 8800 ICP-MS for semiconductor applications

• Unit:

  1 Each

Omega Lens for s-lens of Agilent 7700, 7900 and 8800 semiconductor ICP-MS. Stainless Steel omega lens for s-lens of Agilent 7700, 7900 and 8800 ICP-MS for semiconductor applications

• Unit:

  1 Each

ORS cell exit lens for Agilent 7700 and 8800 ICP-MS. Replacement cell exit lens on Octopole Reaction System cell for Agilent 7700 and 8800 ICP-MS

• Unit:

  1 Each

Ion gauge cable, used with series 7700, 7900, and 8800 ICP-MS systems, models 7700e, 7700s, and 7700x

Cable, RF generator to matching box for phase signal, used with series 7700, 7900, 8800 ICP-MS systems, models 7700e, 7700s, and 7700x

Cable, main PCA board to ORS driver PCA board, used with series 7700, 7900, and 8800 ICP-MS systems, models 7700e, 7700S, and 7700x

Tubing and filter for Argon supply to instrument, for Agilent ICP-MS with x-lens. Includes Nylon tubing (5 m) with fittings and connector (p/n 5063-9132), fiber membrane gas filter (p/n G1820-80341). Suitable for 7700, 7800, 7850, 7900, 8800 with...

• Unit:

  1 Set

Tubing and filter for Argon supply to instrument, for Agilent ICP-MS with s-lens for semiconductor analysis. Includes PTFE tubing (5 m) with fittings and connector (p/n 5063-9132), high purity Argon Gas filter (p/n 5064-8092). Suitable for 7700,...

• Unit:

  1 Set