Manual, Japanese, Agilent integrated autosampler (I-AS), Agilent ICP-MS. User manual for Agilent Integrated Autosampler (I-AS)

• Unit:

  1

Nebulizer, Mira Mist, PEEK, for high TDS applications. Suitable for all Agilent ICP-MS series. Enhanced parallel path nebulizer gives high salts and TDS capability. Recommended for most applications but NOT recommended for some organic solvents, HF...

• Unit:

  1 Each

Nebulizer, MicroMist, with EzyFit sample connector, standard with Agilent 7700x/e, 8800 and 7500cx/ce ICP-MS. Borosilicate glass concentric nebulizer used as standard on Agilent x-lens ICP-MS instruments. Suitable for most sample types except those...

• Unit:

  1 Each

Nebulizer, MicroMist, U-series with UniFit sample connector, standard with Agilent 7800/7850/7900 Series ICP-MS. Borosilicate glass concentric nebulizer used as standard on Agilent x-lens ICP-MS instruments. Suitable for most sample types except...

• Unit:

  1 Each

EzyLok gas connector for carrier gas, suits most concentric nebulizers used with ICP-OES/MS. Only Ezylok connector supplied, suits 4 mm od gas inlet tubing

• Unit:

  1 Each

Speciation column for testing chromium in drinking water by HPLC-ICP-MS. Anion exchange column for speciation of chromium in drinking water samples by HPLC ICP-MS

• Unit:

  1 Each

Pillar, torch box to spray chamber bracket, for use with HMI kit, used with series 7500 ICP-MS systems

Platinum (Pt) skimmer cone with nickel (Ni) base for Agilent 7500cs ICP-MS, for specialized semiconductor applications, use with Pt sampling cone. Use with platinum sampler cone G1820-65239 with Agilent 7500cs ICP-MS

• Unit:

  1

Torch stand assembly, used with all series 7500 ICP-MS systems

Obsolete. No replacement recommendation. Gate valve assembly, without ancillary parts, used with all series 7500 ICP-MS systems

Copper (Cu) skimmer cone for Agilent 7500cs ICP-MS, for special applications such as ultra-trace analysis by cool mode and Pt analysis by hot mode in hydrogen peroxide, use with Ni sampling cone. Use with nickel sampling cone G1820-65238 with...

• Unit:

  1

Center wall assembly with contact plate, used with all series ICP-MS 7500 systems

AFC gas flow module, used with series 7500 ICP-MS systems, model G327xA/B

Solenoid valve assembly for gas flow, used with series 7500 ICP-MS systems, model G327xA

QP driver cable, QP DC board to fan, series JP400xxxx and later, used with series 7500 ICP-MS systems

Water tube tube kit, used with series 7500 ICP-MS systems, models G31xxB and G327xA

Main board, PCA assembly, used with all series 7500 ICP-MS systems. This replacement part can only be ordered in connection with a repair by an Agilent certified Engineer. Please contact your Agilent Service Contact Center.

Vacuum valve assembly for G31xxB and G327xA, includes vacuum hose, used with all series 7500 ICP-MS systems, models 7500c, 7500ce, 7500cs, and 7500cx

Quartz torch, single-piece, 2.5 mm id injector, standard for Agilent 7500 ICP-MS. Suitable for most routine applications, but not for volatile organic solvents or samples containing hydrofluoric acid (HF)

• Unit:

  1 Each

Obsolete. No replacement recommendation. Spray chamber for ultra-trace boron analysis, Agilent 7500 series ICP-MS.

• Unit:

  1