Argon clean gas filter, high purity for semi-conductor applications. Replacement argon supply filter recommended for lowest background required in semiconductor applications (s-lens configuration), suitable for all Agilent ICP-MS instruments

• Unit:

  1 Each

Spray chamber, baffled, glass, cyclonic, with ball joint, for ball-joint injectors, for NexION. Standard glass cyclonic spray chamber for PerkinElmer NexION 300 and 350 ICP-MS. Used without spray chamber cooling

• Unit:

  1 Each

Spray chamber, baffled, glass, cyclonic, with ball joint, for ELAN DRC/DRC Plus/DRC II. Standard glass cyclonic spray chamber for PerkinElmer ELAN DRC/DRC Plus/DRC II ICP-MS. Used without spray chamber cooling

• Unit:

  1 Each

Spray chamber, high purity, quartz, cyclonic, O-ring-free, for NexION. Quartz cyclonic spray chamber with auxiliary gas port for PerkinElmer 300 and 350 ICP-MS. Can be used in conjunction with Peltier cooler inlet systems. Provides excellent...

• Unit:

  1 Each

PerkinElmer Elan and NexION Torch, quartz, demountable, used with fully replaceable sample injector made of fused
alumina, quartz, or sapphire (not supplied),. Demountable 0-slot one-piece quartz torch recommended for organic solvents on...

• Unit:

  1 Each

Skimmer cone, nickel, 0.9 mm orifice, for ELAN 9000/6x00/DRC, not compatible with NexION. Use with nickel sampler cone 8003-0573 on PerkinElmer ELAN 9000/6x00/DRC ICP-MS

• Unit:

  1 Each

Peristaltic pump tubing for PerkinElmer ELAN and NexION, Flared end PVC Tygon®, 2-stop, yellow/green tabs, 0.44 mm id, 1 pack of 6 pcs. Suitable for use with PerkinElmer ELAN and NexION ICP-MS

• Unit:

  6 Each

Drain tubing, PTFE, 1/16 inch od, 0.038 inch id, for PerkinElmer NexION. PTFE tubing used for drain, 1 foot long, on PerkinElmer NexION ICP-MS systems

• Unit:

  1 Each

Spray chamber, ultraclean, low-volume Scott type PFA spray chamber, for concentric nebulizers with PFA end cap, for NexION. PFA low-volume (47 mL) Scott type spray chamber with PFA end cap for PerkinElmer NexION 300 and 350 ICP-MS. For high...

• Unit:

  1 Each

Spray chamber, ultraclean, low-volume Scott type PFA spray chamber, for concentric nebulizers, requires PFA injector assembly and end cap, for NexION. PFA low-volume (47 mL) Scott type spray chamber without PFA end cap or PFA injector assembly for...

• Unit:

  1 Each

Nebulizer, concentric, quartz, recommended for organic and high-purity analysis. Quartz concentric nebulizer recommended for trace analysis of high-purity samples. Cleaner than borosilicate glass nebulizers used as standard. Suitable for most...

• Unit:

  1 Each

Platinum (Pt) skimmer cone, Agilent 7500s/a/I, allows introduction of hydrofluoric acid and other reagents, use with Pt sampling cone. Use with platinum sampler cone G1820-65239 with Agilent 7500s/a/I ICP-MS

• Unit:

  1

ISIS-DS, Sample tubing, PFA with PEEK guide, 0.15 mm id, 1.6 mm od, 70 cm, 5/pk. Suitable for ISIS-DS used with Agilent 7500 ICP-MS

• Unit:

  5 Each

ISIS-DS, Sample tubing, PFA with PEEK guide, 0.2 mm id, 1.6 mm od, 70 cm, 5/pk. Suitable for ISIS-DS used with Agilent 7500 ICP-MS

• Unit:

  5 Each

ISIS-DS Sample uptake tubing, PFA with PEEK guide, 0.3 mm id, 1.6 mm od, 70 cm, 5/pk. Suitable for ISIS-DS used with Agilent 7500 ICP-MS

• Unit:

  5 Each

Platinum (Pt) skimmer cone with copper (Cu) base Agilent 7500cs, use with Pt sampling cone. Use with platinum sampler cone G1820-65239 with Agilent 7500cs ICP-MS

• Unit:

  1

Peristaltic pump tubing, for internal standard (ISTD) uptake, PVC Tygon®, 3-stop, orange/red tabs, 0.19 mm id, 1 pack of 12 pcs. Recommended for online ISTD uptake on Agilent 7500 ICP-MS, with 3-stops for maximum lifetime

• Unit:

  12 Each

Peristaltic pump tubing for ISIS, Ismaprene, 2-stop, orange/purple tabs, 2.54 mm id, 1 pack of 6 pcs. For use with ISIS on Agilent 7700, 8800 ICP-MS

• Unit:

  6 Each

ISIS, Hydride generation, Plug for nebulizer gas connector (4.0 mm od), 3/pk. Use with Hydride generation accessory for ISIS. Suitable for Agilent 7700 & 8800 ICP-MS with ISIS

• Unit:

  3 Each

Drain tube, PVC (Tygon), 3/32" x 5/32", 5 m. Tygon tubing used to connect the ICP-MS spray chamber drain to the waste vessel

• Unit:

  1 Each