Refine Results
- Products
- Applications and Industries
- Services
- Content Type
- Analysis Technique
- Analyzed With
- Chemical Group
- Compounds
- Detection Technique
- Injection Technique
- Instrument
- Method
- Agency Method
- Inner Diameter
- Length
- Outer DIameter
- Packaging
- Model
- Solvent
- Analyte
- CAS Number
- Concentration
- Format
- Technique
- Unit Quantity
- Volume
- Analysis Platform
- MS Instrument Compatibility
- Spectroscopy Instrument Compatibility
- About Agilent
- Language
- Publication Date
2161 - 2180 of 21615 results
Need help finding the right ICP supplies? Try our ICP Supplies Selector Tool.
To be enabled for e-commerce, you must first register. Agilent will then confirm your registration and inform you when your enablement is complete and you can begin transacting.
E-commerce is currently not available in your country. For select consumables and supplies you may now use Saved Cart link under your Account to build lists and send to your Agilent Representative. Simply login or register and you may begin.
Compare
Multi-element calibration standard-2A: Contains 2x100mL bottles
Bottle 1 contains 10 mg/L of Ag, Al, As, Ba, Be, Ca, Cd, Co, Cr, Cs, Cu, Fe, Ga, K, Li, Mg, Mn, Na, Ni, Pb, Rb, Se, Sr, Tl, U, V, Zn in a matrix of 5% HNO3.
Bottle 2...
-
Volume:
100 mL
-
Unit:
1 Pack
Compare
Inverter-driven, 45 m3/h roughing pump, ideal for LC/MS and ICP/MS instruments
The Agilent MS45 is a single stage, oil-sealed rotary vane pump designed to deliver reliable roughing performance for today’s most demanding laboratory applications. Equipped with an energy efficient inverter-driven motor, the MS45 provides high gas throughput operation below 10 Torr, ensuring stable, consistent performance across mass spectrometry (LC/MS, ICP/MS, GC/TOF/MS), electron microscopy, and a wide range of scientific instrumentation platforms.|Engineered for universal compatibility and seamless integration, the MS45 combines robust vacuum performance with intelligent control features that optimize energy use, simplify monitoring, and enhance system protection.
Sample tubes & vials for SPS 4, SPS 3, and ASX 500 autosamplers for AAS, ICP-OES, MP-AES and ICP-MS
A number of autosamplers have been used with Agilent AA, ICP-OES, MP-AES and ICP-MS instruments, depending on the specific model. This includes the Agilent SPS 4 used with current instruments, and the SPS 3 or ASX 500 Series used with earlier model instruments.|Each autosampler automates the presentation of liquid samples, drawn from tubes held in racks loaded on the rack location mat, to the instrument for analysis. Each autosampler can accommodate a variety of fixtures, including standards and sample racks, probes and other accessories.|A range of sample tubes and vials of different sizes (OD, height and volume) are available, giving you flexibility in the type of vessel used with the autosamplers in your lab.
Rinse reservoirs and other autosampler supplies used with Agilent SPS 4 and ASX 500 autosamplers
A number of different autosamplers have been used with Agilent AA, ICP-OES, MP-AES, and ICP-MS instruments, depending on the specific model. This includes the Agilent SPS 4 used with current instruments, and the ASX 500 Series used with earlier model instruments. Each model autosampler is designed to automate the presentation of liquid samples, drawn from tubes held in racks loaded on the rack location mat, to the instrument for analysis.|A range of rinse reservoirs and other autosampler supplies are available to upgrade probe rinsing capacity, giving you flexibility to improve the capabilities of the autosamplers used in your lab.
Sample racks & overlays for SPS 4, SPS 3 & ASX 500 autosamplers for AAS, ICP-OES, MP-AES & ICP-MS
A number of different autosamplers have been used with Agilent AA, ICP-OES, MP-AES and ICP-MS instruments, depending on the specific model. This includes the Agilent SPS 4 used with current instruments, and the SPS 3 or ASX 500 Series used with earlier model instruments.|Each model autosampler is designed to automate the presentation of liquid samples, drawn from tubes held in racks loaded on the rack location mat, to the instrument for analysis. Each autosampler can accommodate a variety of fixtures, including standards and sample racks, probes and other accessories.|A range of sample racks accommodating vials and tubes of different sizes are available for use with these autosamplers.
Sampling probes for autosamplers used with Agilent AAS, ICP-OES, MP-AES, and ICP-MS instruments
Many types of autosamplers have been used with Agilent AA, ICP-OES, MP-AES and ICP-MS instruments, depending on the specific model. This includes the Agilent SPS 4 used with current instruments, and the SPS 3 and ASX 500 series used with earlier model instruments.|Replacement autosampler probes for the Agilent SPS 4, SPS 3 and the Agilent ASX 500 series autosamplers are available.
Replacement tubing for autosamplers used with Agilent AAS, ICP-OES, MP-AES and ICP-MS instruments
A number of different autosamplers have been used with Agilent AA, ICP-OES, MP-AES, and ICP-MS instruments, depending on the specific model. This includes the Agilent SPS 4 used with current instruments, and the SPS 3 and ASX 500 series used with earlier model instruments.|Replacement tubing for the Agilent SPS 4, SPS 3, and the Agilent ASX 500 series autosamplers are available.
A range of update kits and optional accessories are available to upgrade sample handling capacity
A number of different autosamplers have been used with Agilent AA, ICP-OES, MP-AES and ICP-MS instruments, depending on the specific model. This includes the Agilent SPS 4 used with current instruments, and the SPS 3 or ASX 500 series used with earlier model instruments. Each model autosampler is designed to automate the presentation of liquid samples, drawn from tubes held in racks loaded on the rack location mat, to the instrument for analysis.|A range of optional accessories and update kits are available to upgrade sample handling capacity, giving you flexibility to improve the capabilities of the autosamplers used in your lab.
Chiller fluids and filters for use with Perkin Elmer ICP-OES Optima Instruments.
Agilent filters and chiller fluid are equivalent to the PerkinElmer ICP-OES versions for use with complete confidence.
Axial and Radial purge extension windows for Perkin Elmer Optima ICP-OES.
Purge extension windows for Perkin Elmer ICP-OES Optima instruments. Purge windows are available in both axial and radial and are guaranteed to work with your Perkin Elmer instrument. Agilent supplies are equivalent to PerkinElmer ICP-OES supplies for use with complete confidence.
Perkin Elmer Optima ICP-OES Work/Load Coil and Ignitor Supplies.
Agilent RF Work/Load coils and igniter supplies are equivalent to the PerkinElmer ICP-OES versions for use with complete confidence.
O-Rings and fittings for PerkinElmer ICP-OES instruments.
Agilent O-rings are equivalent to PerkinElmer ICP-OES O-rings for complete confidence.
Wide range of Perkin Elmer ICP-OES peristaltic pump tubing.
Agilent peristaltic pump tubing is equivalent to Perkin Elmer ICP-OES peristaltic pump tubing for complete confidence. Agilent offers a variety of peristaltic pump tubing available to meet the needs of any sample matrix. All tubing is compatible with Perkin Elmer Optima ICP-OES.|The standard Agilent guarantee applies to our chemistries and supplies for PerkinElmer systems – 90 days from the date of shipment to you, with no need to keep a log of operating hours to qualify for the warranty.
Various tubing for Perkin Elmer Optima ICP-OES
Agilent tubing is equivalent to Perkin Elmer ICP-OES tubing for complete confidence. Agilent offers a variety of tubing available to meet the needs of any sample matrix. All tubing is compatible with Perkin Elmer Optima ICP-OES.|The standard Agilent guarantee applies to our chemistries and supplies for PerkinElmer systems – 90 days from the date of shipment to you, with no need to keep a log of operating hours to qualify for the warranty.
NIST traceable multi-element RMs and CRMs for testing elemental impurities. Calibration and tuning mixes for instrumentation and EPA specific methods.
Agilent offers multi-element standards and certified reference materials for testing elemental impurities in environmental, food, mining, chemical, and pharmaceutical markets. By using our multi-element standards and kits, it allows you to save time by pre-mixing individual standards. |Our portfolio includes multi-element standards and kits for USP/ICH 232/233, EPA methods and more. Our portfolio also includes calibration and tuning mixes for ICP-MS, ICP-OES, AA, and IC instrumentation. All our ICP-MS multi-element standards are manufactured to CRM quality level. With 40 years of expertise in manufacturing inorganic mixes and having NIST traceability, our multi-element certified reference materials offer consistent and reliable results.
Inline GC gas purifiers, traps, and filters for removal of oxygen, moisture, and hydrocarbons.
Agilent inline gas purifiers (traps or filters) remove common contaminates such as oxygen, moisture, and hydrocarbons from GC carrier and detector gases. Our GC gas purifiers are available in different sizes and configurations such as combination gas traps that remove moisture, oxygen, and/or organics with a single trap. Using oxygen and moisture traps for carrier gas extends column life and protects the instrument. Removing hydrocarbons helps improve detector baselines.|Big Universal Traps are one type of inline gas filters Agilent offers for maximum trapping capacity (750 cc). Big Universal Traps utilize a layered bed packing of the highest capacity adsorbent materials to purify the carrier and detector gases to a cumulative level of 100 parts per billion of common contaminates. Install a Big Universal Trap vertically ahead of a Gas Clean Purification System can further maximize trapping capacity and is ideal for bulk purification applications. Besides GC and GC/MS, Agilent also offers big traps for other analytical techniques like LC/MS and ICP-MS.
Handheld, battery-powered electronic leak detector to identify gas leaks in analytical instruments
Electronic GC leak detectors are used to detect leaks in the tubing and connections of GC & GC/MS instruments. Laboratories that use expensive high-purity or hazardous gases for operation of GC instruments routinely use electronic leak detectors to prevent safety issues, reduced sensitivity and productivity, and shortened lifetimes of consumables. |The Agilent CrossLab Cartridge System (CS) Electronic GC Leak Detector will detect leaks or verify leak-free tubing and fittings for various gas types, including hydrogen, nitrogen, helium, and others, throughout the lab or site. The design of this new Agilent handheld leak detector is unique on the market. The cartridge design combines the two most critical GC flow path monitoring tasks, including flow rate and leak detection monitoring, into a single handheld system with the bundle offering. Our GC leak detectors can also be used for other analytical techniques like LC/MS and ICP-MS.
Agilent metallo-organic standards are the highest quality metallo-organic mixes in the industry, manufactured with rigorous quality control in an ISO/IEC 17025 laboratory. All Agilent AA, ICP-MS, and ICP-OES standards are made from high purity raw...
Agilent metallo-organic standards are the highest quality metallo-organic mixes in the industry, manufactured with rigorous quality control in an ISO/IEC 17025 laboratory. All Agilent AA, ICP-MS, and ICP-OES standards are made from high purity raw materials and matrix acids, and 18 MΩ deionized water.
Standard racks and compatible vessels for SPS 4 autosampler used with AAS, ICP-OES, MP-AES, & ICP-MS
The Agilent SPS 4 autosampler is designed to automate the presentation of liquid samples., The samples are drawn from tubes held in racks loaded on the rack location mat , and presented to the instrument for analysis. The Agilent SPS 4 can accommodate a variety of fixtures, including a standards rack, four sample racks, and other accessories.|There are 2 standard rack options available for the SPS 4 autosampler, used with Agilent AA, ICP-OES, MP-AES and ICP-MS instruments. The - 34-well (12 wells for 29 mm OD tubes + 22 wells for 17 mm OD tubes) or 5 well (for 60 mm OD bottles).
Agilent tubing and tubing assemblies are fully compatible with your PerkinElmer FIMS/FIAS systems.
Agilent tubing and tubing assemblies are fully compatible with your PerkinElmer FIMS/FIAS systems, so you can be confident that they will integrate seamlessly with your PerkinElmer system.