Quartz connector from spray chamber to torch with dilution port for high matrix introduction (HMI). Suitable for use with all Agilent ICP-MS including with HMI aerosol dilution 7500, 7700, 7800, 7850 and 8800

• Unit:

  1 Each

Quartz connector from spray chamber to torch, without gas port. Suitable for use with all Agilent ICP-MS including 7850, 7900, 8900 with UHMI and 7500, 7700, 7800, 8800 without HMI aerosol dilution

• Unit:

  1 Each

Drain Tubing for aqueous waste, PVC Tygon®, 3 mm id, 6 mm OD, 3 m length per unit. Suitable for use for aqueous samples from spray chamber drain peristaltic pump tubing or Autosampler drain to waste vessel. Used with all Agilent ICP-MS models.

• Unit:

  1 Each

Obsolete. Replaced by 5005-0021

• Unit:

  12 Each

Quartz Spray chamber, Scott double-pass, standard for Agilent 7500, 7700, 7800 and 8800. For use with HMI or no aerosol gas dilution. Also suits 7850 / 7900 / 8900 if UHMI capability is not required. Requires end cap p/n G3280-60008.

• Unit:

  1 Each

Quartz Spray chamber with fixed connector to torch, Scott double-pass, recommended for ultra-trace analysis of Boron. For use without aerosol gas dilution, not compatible with HMI or UHMI. Optional on all Agilent ICP-MS. Requires End Cap...

• Unit:

  1 Each

Spray chamber, single-pass, suitable for capillary LC interface and very low-flow sample introduction applications. For use with total consumption nebulizer (G3280-80602) for capillary LC interface kit. Suitable for all Agilent ICP-MS

• Volume:

  8 mL

• Unit:

  1 Each

Injector, sapphire, 2.5 mm id, for PFA inert kit, for aqueous samples. Replacement for PFA inert sample introduction kit with Agilent 7500, 7700, 7800, 7850, 7900, 8800, 8900 ICP-MS

• Unit:

  1 Each

Injector, platinum, 2.5 mm id, for PFA inert kit, for aqueous samples in semiconductor applications. Replacement for PFA inert sample introduction kit with Agilent 7500, 7700, 7800, 7850, 7900, 8800, 8900 ICP-MS

• Unit:

  1 Each

Sample probe, carbon fiber, 1.0 mm id (2 blue bands), for ASX 500 autosampler. Suitable for use with Agilent ICP-MS systems supported by MassHunter software.

• Unit:

  1 Each

Semi-demountable inert torch for PFA inert kit, used with 2.5mm id sapphire or platinum injector for aqueous applications. Replacement outer quartz torch body for PFA inert sample introduction kit suitable for Agilent 7500, 7700, 7800, 7850, 7900,...

• Unit:

  1 Each

Semi-demountable inert torch for PFA inert kit, used with 1.5mm id sapphire or platinum injector for organic applications. Replacement outer quartz torch body for PFA inert sample introduction kit suitable for Agilent 7500, 7700, 7800, 7850, 7900,...

• Unit:

  1 Each

EPA method 200.7 calibration kit

• Unit:

  1 Kit

ICH/USP oral target elements standard C, Au, Ir, Os, Pd, Pt, Rh, and Ru 100 µg/mL in 15 % HCl. Obsolete - Please order replacement part number = 5191-4555

• Volume:

  100 mL

• Unit:

  1 Each

ICH Q3D and USP 232 Orals kit. Obsolete - Please order replacement part number = 5191-4553

• Unit:

  1 Kit

ICH/USP 232 parenteral kit, 4 x 100 mL. Obsolete - Please order replacement part number = 5191-4556

• Volume:

  400 mL

• Unit:

  1 Each

Comprehensive multi-group differential analysis toolbox, including metabolic pathway analysis and compound identification for GC/MS, ICP/MS and LC/MS data

Inverter-driven, 40 m³/h roughing pump ideal for LC/MS and ICP/MS instruments

Semiquantitative calibration standard 2, in 40% aqua regia, trace HF, Au, B, Be, Co, Cr, Cu, Fe, Ge, Hf, Ir, K, Li, Mn, Mo, Nb, Ni, Os, Pd, Pt, Re, Rh, Ru, Sb, Si, Sn, Ta, Te, Ti, V, W, Zn, Zr 10 µg/mL

• Unit:

  1 Each

ICH/USP oral target elements standard D: Cr 11,000 µg/mL, Sn 6000 µg/mL, Cu and Mo 3000 µg/mL, Ba 1400 µg/mL, Sb 1200 µg/mL, Li 550 µg/mL in 5% HNO3/tr. HF

• Volume:

  100 mL

• Unit:

  1 Each