Before installing this software please read this Pre-install Notice:
- The new featuresare briefly highlighted below. In order to take full advantage of the newest revision and learn its features, please refer to the latest version of the Agilent 7500 Series ICP-MS ChemStation (G1834B) Operator’s Manual. In the event you are using supported peripherals (such as autosampler or HMI kit); please read the manuals which came with the peripherals.
The P/N for the version of the Operator's Manual published in conjunction with the release of B.03.07 is:
- G3270-90115 (English)
- G3270-96114 (Japanese)
A copy can be ordered by contacting your Agilent representative. After installation,please also refer to the online help for assistance in using the software.
Additional Information
- New features
- System Requirements
- Compatibilities
New Features of Rev.B.03.07
- Improved HMI User interface and Functionality: The High Matrix Introduction (HMI) accessory for the Agilent 7500cx enables analysts to directly measure samples with total dissolved solids (TDS) content of 1% or higher. The HMI software has now been improved for ease of set-up and use. The new user interface enables users to select a preset condition from the one screen. Furthermore, this new revision provides the flexibility to switch tuning files even after a preset condition is loaded.
- Improved Security with ECM Integration: For users of the ICP-MS ChemStation ECM Integration in combination with the ICP-MS User Access Control Pack for 21 CFR Part 11 compliance, access security capability is enhanced. The "Lock/Unlock ChemStation" function is available when using with the User Access Control Pack (G3263A). In this new revision, when an operator shift change occurs, another operator can log on to the ICP-MS ChemStation with his own ID. It protects the ICP-MS ChemStation from unauthorized operation.
- Better Hyphenated ICP-MS Applications with GC and LC: The Agilent GC/LC ChemStation rev.B.03.02 can now be installed together with the ICP-MS ChemStation on the same PC (Note: English only). A method from the LC/GC ChemStation can be run as part of an ICP-MS ChemStation sequence. Also, the new revision supports the GC injector in Back position as well as Front position (the previous revision only supports the front injector). Note: Dual injection is not supported.
New Features of Rev.B.03.06 - Agilent OpenLAB ECM Integration. It will provide the capability to save the ICP-MS ChemStation objects such as Data, Method, Calibration and so on into the ECM server.
New Features of Rev.B.03.05
- Agilent 7500cx is supported. It is possible to configure and control Agilent 7500cx.
- Aerosol Control option is supported. ICP-MS ChemStation provides 'Aerosol Control' feature to Agilent 7500cx with installed HMI kit. You can set plasma conditions for high matrix samples easily by using the 'Aerosol Control' feature.
- CETAC EXR-8 autosampler is supported. It is possible to configure and control the CETAC EXR-8 auto sampler.
- Evacuation Assist Valve is supported. It is possible to control the Evacuation Assist Valve.
System Requirements
Following are the system requirements for Rev.B.03.05 or later.
1. PC: HP Compaq d510SFF Pentium4 2.4GHz or faster
2. System Memory: 512MB of RAM or greater
3. Hard Disk: 80GB or greater
4. OS: Windows XP Professional + Service Pack 2
5. Internet Explorer: Internet Explorer 6 + Service Pack 1
6. Printer: HP LaserJet 4000, HP LaserJet 4050 or HP LaserJet 2200
Notice: Printers shipped with ChemStation PC after release of Rev. B.01.01 also supported.
7. I/O Libraries: ver.M.01.01.04
8. Supported Instrument: Agilent 7500 LAN model
Compatibilities
The following is the list of file compatibilities between G1834B Rev.B.03.05 and the previous release (G1834B, Rev.B.03.04).
| Methods | same |
| Calibration | same |
| Data | same |
| Tune | same |
| Sequence | same |
| Chained Sequence | same |
| Report Template | same |
| QC Mode | same |