Search | Agilent

To be enabled for e-commerce, you must first register. Agilent will then confirm your registration and inform you when your enablement is complete and you can begin transacting.

E-commerce is currently not available in your country. For select consumables and supplies you may now use Saved Cart link under your Account to build lists and send to your Agilent Representative. Simply login or register and you may begin.

On-Deck Thermal Cycler

The Bravo NGS with on-deck thermal cycler increases walkaway time and ease of use, and streamlines protocols.

Quick View BUY PRODUCTS

The on-deck thermal cycler (ODTC) is a critical tool in many genomics and molecular biology workflows.  This optional accessory enables the Agilent Bravo automated liquid handling platform to provide thermal cycling as part of an automated protocol and extends walk-away time. This setup is beneficial especially for applications such as library preparation and target enrichment steps in next-generation sequencing (NGS) workflows, end-point PCR, and cell-based applications.  |VWorks software enables full integration of the ODTC with the Agilent Bravo platform, allowing direct pipetting into skirted 96-well PCR plates. Along with prevalidated protocols for SureSelect NGS reagents, the ODTC helps minimize sample preparation time, effort, and complexity for a streamlined workflow.

Product Overviews

Cool On-Column (COC) Inlet Supplies

Cool on-column inlets afford high precision injection to eliminate sample discrimination, sample alteration.

Quick View BUY PRODUCTS

Cool on-column injection is superior in many ways to other sample introduction techniques by offering high precision injection to eliminate sample discrimination and sample alteration.|Agilent provides all the necessary supplies to set-up and maintain your COC injection port.

Service Overviews

CrossLab On Demand Services

Repair confidently without contract commitment using Agilent CrossLab On Demand Services. Our certified professionals deliver fast repairs done right the first time. With flexible support using genuine Agilent parts, your instruments are restored...

Quick View REQUEST QUOTE

Safeguard lab performance with Agilent CrossLab On Demand Services for a solution that is reliable and service plan free. For labs managing their own instrument maintenance, Agilent's genuine repair parts and supplies keep your operations compliant and running smoothly. Empower your in-house team with certified professionals and authentic Agilent parts to protect instrument uptime and ensure peak performance. Request expert support online or by phone to experience fast, seamless service.

Programmable Cool On-Column Inlet

Minimize sample degradation or discrimination.

Quick View REQUEST QUOTE

The temperature programmable cool on-column (COC) inlet for 8890, 8850, 8860, and 7890B gas chromatography systems allows direct injection of a GC sample onto a cool capillary column. This ensures quantitative sample transfer without thermal degradation of analytes.|The COC inlet offers high accuracy and reproducibility. It is ideal for thermally labile or unstable compounds or for GC samples containing components with large boiling-point differences that may experience discrimination when injected into a hot inlet.

Oligo aCGH/ChIP-on-chip Hybridization Kit

Optimized for hybridization of genetic samples for reliable and consistent results

Quick View BUY PRODUCTS

The Agilent Hybridization Kit provides optimized hybridization kinetics, enhanced signal intensity and maximum noise reduction. The high quality CGH hybridization solution provides reliable data for many different experiments. Additional reagents are required to prepare the hybridization solution, such as Cot-1 DNA, DNase/RNase-Free distilled water.|Our Oligo aCGH/ChIP-on-Chip hybridization kit is available in two different formats, with sufficient reagents for the hybridization of 24 or 96 slides minimum. Both kit formats are provided with the relevant hybridization buffer and blocking agent. Please see the manual for part number details.

Community Search Results

Tune check on positive mode is failing but passing on negative mode Tune check on positive mode is failing but passing on negative mode

Hello, For LCMS 6120 Agilent, I was doing positive mode tuning and it passed, for checking the tune it was good for a few minutes and suddenly signal dropped from around 80000 to 7, checked the calibration valve, flushed system, cleaned ion source and capillary, still signal is very low. However, it is perfectly passing the negative mode. Is it a hardware issue? any help is highly appreciated.

Cd >LOQ on ICS-A for EPA 6020A testing on 7900 ICP-MS Cd >LOQ on ICS-A for EPA 6020A testing on 7900 ICP-MS

For the past week we have had Cd flag on our ICS-A test where the blank ran before and after it show nothing. We've been running this same method for about 3 years now and I've never seen an ICS-A fail so I'm not exactly sure how to go about troubleshooting that.

R^2 only on Calibration report no R= on report R^2 only on Calibration report no R= on report

Currently on the report there is the R^2 and the R. I would like to have just the R^2. Is there a way to remove it either in the report or in the MassHunter 12.2 Quantitative analysis.

custom sample report designer: Is it possible to get all the data on one pdf rather than it generating a separate pdf for each sample custom sample report designer: Is it possible to get all the data on one pdf rather than it generating a separate pdf for each sample

I am trying to create a report template on custom sample report designer. Is it possible to get all the data on one pdf rather than it generating a separate pdf for each sample. I am specifically creating a template for LC-ICP-MS so each page would contain the sample data and chromatogram, but Id like the whole data set in one pdf. Thank you

See All Community Search Results

HydroInert Source for Hydrogen Carrier Gas on GC/MS

The HydroInert source is designed to improve chromatographic efficiencies with hydrogen carrier gas.

Quick View BUY PRODUCTS

Hydrogen as a carrier gas in GC/MS is a low-cost, renewable gas suitable for several GC/MS applications. Hydrogen carried gas is commonly used as an alternative option to helium. Helium is a finite resource and this, alongside inefficient production, makes it expensive. The high price and recurring shortages have increased demand for applications using a hydrogen carrier gas.|The Agilent HydroInert Source is a GC/MS ion source that improves chromatographic performance when using hydrogen as carrier gas in GC/MS. It helps to avoid loss of sensitivity and spectral anomalies, while offering a high-boiler peak shape. The Agilent HydroInert source reduces the need for GC/MS ion source cleaning, decreasing system downtime and maintenance and resulting in fewer interruptions to data generation.|Chromatographic-quality stainless steel tubing and fittings are often recommended for hydrogen plumbing. Agilent offers a stainless steel install kit (19199S) to help prevent serious contamination problems.|Users can continue to use existing He-based mass spectral libraries and quantitative methods.

Target Retrieval Solution, pH 9 (50x) for use with SK032 on Autostainer Link 48

Quick View REQUEST QUOTE

Target Retrieval Solution, pH 9 (50x) is intended for automated laboratory use in qualitative immunohistochemistry. The reagent is used in the PT Link module for heat-induced epitope retrieval on formalin-fixed, paraffin-embedded (FFPE)
tissue sections prior to immunohistochemical staining on Autostainer Link 48. Tris/EDTA buffer, pH 9. Provided as 3 x 30 mL reagent, 50x concentrated, corresponding to 200–430 tests. The volume is optimized for dilution in PT Link tanks.