Search | Agilent

To be enabled for e-commerce, you must first register. Agilent will then confirm your registration and inform you when your enablement is complete and you can begin transacting.

E-commerce is currently not available in your country. For select consumables and supplies you may now use Saved Cart link under your Account to build lists and send to your Agilent Representative. Simply login or register and you may begin.

Fraction Collector Supplies for HPLC

A variety of supplies for a range of fraction collectors to suit your purification needs

Quick View BUY PRODUCTS

Agilent provides a variety of parts and supplies for fraction collectors, including test tubes, tube containers and drawers, well plates and trays, and tubing and tubing kits, as well as delay calibrant, ensuring enhanced performance and capability of your fraction collector.|Agilent supplies for fraction collectors are part of a comprehensive portfolio of flexible and reliable solutions for sample purification by LC. Various fraction collectors are available with maximum flow rates from 4 µL/min to 200 mL/min.

Rabbit Immunoglobulin Fraction (Normal)

This product has been prepared from sera of non-immunized rabbits. The immunoglobulin fraction has been isolated in the same way as the immunoglobulin fration of Dako rabbit antibodies.

Quick View BUY PRODUCTS

This product has been prepared from sera of non-immunized rabbits. The immunoglobulin fraction has been isolated in the same way as the immunoglobulin fration of Dako rabbit antibodies. The protein concentration of this product is 20 g/L. It is well-suited as negative control, for example, in immunohistochemistry, ELISA and immunoblotting.|We also provide a solid-phase absorbed version of this product. See related products.

Rabbit Immunoglobulin Fraction (Normal, for Immunohistochemistry)

This product has been prepared from sera of non-immunized rabbits. The immunoglobulin fraction has been isolated in the same way as the immunoglobulin fraction of Dako rabbit antibodies. The protein concentration of X0903 is 20 g/L.

Quick View BUY PRODUCTS

1290 Infinity II Preparative Open-Bed Fraction Collector

High-purity and high-capacity fraction collection at flows up to 200 mL/min.

Quick View

The 1290 Infinity II Preparative Open-Bed Fraction Collector is our most versatile fraction collector, enabling high-capacity fraction collection of purified compounds for semipreparative and preparative-scale LC purification. This module is ideally suited to open-access environments, provides all standard trigger modes for purification workflows, and is optimized for flow rates up to 200 mL/min.|The Open-Bed Fraction Collector can be seamlessly integrated into any InfinityLab Purification System. The integrated fraction delay sensor allows automated delay calibration for maximum substance recovery. The module uses RFID tagging for automated and rapid detection of vessel dimensions. The fast X-Z-theta probe minimizes sample loss during movement between vessels.

1260 Infinity II Preparative-Scale Fraction Collector

High-purity collection of semipreparative quantities at flows between 4 and 100 mL/min.

Quick View

The 1260 Infinity II Preparative Fraction Collector is optimized for laboratories performing semipreparative-scale purification of milligram to low gram quantities with typical flow rates between 4 and 100 mL/min. The module features the full set of collection modes and is compatible with a wide variety of trigger sources. SBS plates and four different tube sizes with various lengths are supported.|The Preparative-Scale Fraction Collector features a compact closed-box design, requires minimal bench space, and can be seamlessly integrated into any InfinityLab Purification System. The built-in fraction delay sensor allows automated delay calibration for maximum substance recovery, and the four preconfigured capillary kits ensure minimum peak dispersion for maximum purity. Maximum capacity can be easily enhanced by clustering up to three modules.

Community Search Results

Inconsistent fraction volumes with fraction collector G1364F? Inconsistent fraction volumes with fraction collector G1364F?

Hello, I'm using a 1200 HPLC with fraction collector G1364F to do some analytical prep work and I've noticed that, despite my collection parameters being time-based (60 sec fractions, flow rate 1 mL/min), the fractions don't all come out at the same volume (= 1 mL). I'd like to flush, or even backflush, the fraction collector, but I can't do so if my needle is not parked in the waste port. Is there a way to park the needle in the "Rinse" position?

Instant pilot does not recognize fraction collector. Firmware issue? Instant pilot does not recognize fraction collector. Firmware issue?

Hello Agilent community, I'm setting up a 1260 Infinity II fraction collector to be paired with G4208A Instant Pilot. After updating the firmware, the controller still does not recognize the FC. Any suggestions are appreciated.

G1363C Fraction collector / Transport initialization failed & no tray detected G1363C Fraction collector / Transport initialization failed & no tray detected

I am having troubles with my G1364C not initializing. Based upon other discussions I likely need to replace the transport unit. However, the module at the same time also reports "no tray installed". I´m just wondering if the tray detection only works after a succesfull initialization or if this is independent. Is it possible to just replace the suspicious motor with part# G1367-89700 (and does it already the encoder mounted)? Thanks in advance...

Instrument Exchange Installation and Deinstallation Instructions for Exchanging Your Fraction Collector Instrument Exchange Installation and Deinstallation Instructions for Exchanging Your Fraction Collector

Instrument Exchange Installation and Deinstallation Instructions for Exchanging Your Fraction Collector

See All Community Search Results

1260 Infinity II Bio-Inert Fraction Collector

Flexible collection from bioseparations in vials, vessels, or microplates at up to 10 mL/min.

Quick View

The 1260 Infinity II Bio-Inert Fraction Collector is the ideal extension to your system when you need to further investigate separated compounds. A wide range of collection vessels, including vials, microplates, or custom vessels, provide highest collection flexibility. Handling flow rates up to 10 mL/min, even separations using columns with larger inside diameters for small-scale preparative applications are possible.|This fraction collector fits perfectly into the Agilent modular LC design and does not require extra bench space. Patented fraction delay calibration and time- or peak-triggered fraction collection facilitates superior recovery and purity. An additional cooling module is available to prevent degradation of thermally labile biomolecules.

1260 Infinity II Preparative Valve-Based Fraction Collector

High-volume fraction collection for purification workflows up to 200 mL/min.

Quick View

The 1260 Infinity II Preparative Valve-Based Fraction Collector is a compact, full-featured fraction collector for daily compound isolation and purification by LC. Optimized for collection of up to 11 high-volume fractions its versatile design allows operation in both routine sample purification workflows and recovery applications. The built-in fraction delay sensor allows precise and automatic calibration of the fraction collector for accurate sample collection.|This fraction collector accepts multiple detectors as trigger sources and includes all standard collection modes like time-based and peak-based. It can be used on any InfinityLab Purification System and its small dimensions occupy virtually no additonal space on the instrument. Blow-outs of nitrogen or compressed air purge the outlet lines after completed collection and help minimize carryover.

1260 Infinity II Analytical-Scale Fraction Collector

High-purity collection of analytical quantities at flows between 0.1 and 10 mL/min.

Quick View

The 1260 Infinity II Analytical-Scale Fraction Collector is optimized for laboratories performing analytical-scale compound purification of nanogram to milligram quantities with typical flow rates between 0.1 and 10 mL/min. The module features the full set of collection modes and is compatible with a wide variety of trigger sources. SBS plates and four different tube sizes with various lenghts are supported.|The Analytical-Scale Fraction Collector features a compact closed-box design, requires minimal bench space, and can be seamlessly integrated into any InfinityLab Analytical System. The built-in fraction delay sensor allows automated delay calibration for maximum substance recovery, and the four preconfigured capillary kits ensure minimum peak dispersion for maximum purity. Maximum capacity can be easily enhanced by clustering up to three modules.