T-joint with earth block, Agilent 7700/8000 series ICP-MS. Used to mix internal standard (ISTD) with sample online and ground connection to prevent any electrostic charge effects.

• Unit:

  1 Each

7700, 7800, 7850 and 8800 with x-lens ICP-MS skimmer cone, Platinum-tip with nickel base. Optional cone used with x-lens for organic solvent analysis using Oxygen/Argon option gas. Recommended to use with Platinum-tip with Nickel-plated Copper base...

• Unit:

  1 Each

Internal water tubing set, used with series 7700, 7900, and 8800 ICP-MS systems, models 7700s and 7700x

Torch box, RF shielding plates, used with series 7700, 7900, and 8800 ICP-MS systems, models 7700s and 7700x

Quad tank, PCA support kit, used with series 7700 ICP-MS systems, models 7700e, 7700s, and 7700x. This replacement part can only be ordered in connection with a repair by an Agilent certified Engineer. Please contact your Agilent Service Contact...

End cap retainer, used with series 7700 and 8800 ICP-MS systems, models 7700s and 7700x

Argon tubing set for gate valve, used with series 7700 and 7900 ICP-MS systems, models 7700e, 7700s, and 7700x

Evacuation assist valve, used with series 7700 ICP-MS systems, models 7700e, 7700s, and 7700x

Spacer, deflect/plated b, Agilent 7700/8000 series ICP-MS, 4/pk. Spacers for the Extraction Lens-Omega Lens Assembly for the Agilent 7700/8000 series ICP-MS

• Unit:

  4 Pack

Alignment tool for work coil, used with series 7700 ICP-MS systems, models 7700e, 7700s, and 7700x

XYZ Assembly Ugrade Kit for 7700, 7800, 7850, 7900, 8800 & 8900 ICP-MS. Contains X & Y pulley assemblies

Argon gas nylon tubing kit, 5 pieces - precut, used with series 7500, 7700, and 7900 ICP-MS systems

Slip ring for sampler, used with series 7700 ICP-MS systems, models 7700e, 7700s, and 7700x

NEMA L6-30P power cord, compatible with 7700, 7800, 7850, 7900, 8800 & 8900 ICP-MS. Default power cord is standard IEC 60309, but a NEMA L6-30P twist lock plug is option for use with NEMA L6-30R receptacles.

Basic consumables kit for 7700, 7800, 7850, 7900, 8800 and 8900 ICP-MS fitted with x-lens and vacuum pump using AVF Platinum pump oil. Contents: Easy-fit peristaltic pump tubes for sample (2-stop, white/white, 12/pk, 5005-0020), waste (3-stop,...

• Unit:

  1 Kit

Solenoid valve, 5-port, for gate valve, used with series 7700 and 7900 ICP-MS systems, models 7700e 7700s, and 7700x

Vacuum hose, housing to vacuum manifold valve assembly, used with series 7700 and 7900 ICP-MS systems, models 7700e, 7700s, and 7700x

Vacuum hose for interface, used with series 7700 and 7900 ICP-MS systems, models 7700e, 7700s, and 7700x

Total consumption nebulizer, suits capillary LC interface kit used with Agilent ICP-MS. Used together with single-pass spray chamber G3280-80603

• Unit:

  1 Each

Hardware maintenance manual for Agilent 7700 Series ICP-MS. Booklet describing the maintenance operations for Agilent 7700 ICP-MS

• Unit:

  1