SPS 6 probe, 0.8 mm id, with green markers. Inert, FEP sleeved for SPS 6 autosampler. Standard SPS 6 autosampler probe for ICP-OES. Compatible when using the Agilent SPS 6 autosampler with ICP-OES and ICP-MS instruments.

SPS 6 probe, 1.0 mm id, with blue markers. Inert, FEP sleeved for SPS 6 autosampler. Compatible when using the Agilent SPS 6 autosampler with ICP-OES and ICP-MS instruments.

SPS 6 probe, 1.2 mm id, with black markers. Inert, FEP sleeved for SPS 6 autosampler. Compatible when using the Agilent SPS 6 autosampler with ICP-OES and ICP-MS instruments.

Clamp, torch ball joint connector, 1/pk. Used to secure ball joint connectors on spray chamber, connector tube and torch. Required to ensure a gas tight seal. Suitable for Agilent 7800, 7850, 7900 and 8900 ICP-MS

• Unit:

  1 Each

Standards rack, 34-position, for Agilent SPS 4 and SPS 6 autosamplers. Provides 12 locations for 50 mL 30 mm od tubes and 22 locations for 18 mm od tubes. Standard rack for MP-AES and ICP-OES configuration. Suitable for ICP-MS with MassHunter...

• Unit:

  1 Each

Standards rack, 5-position, for Agilent SPS 4 and SPS 6 autosampler. Rack provides five positions for 250 mL, 60 mm od, sample containers. Standard rack for ICP-MS configuration. Note: Not compatible with atomic absorption SpectrAA software.

• Unit:

  1 Each

Well plate tray adaptor kit, for Agilent SPS 4 and SPS 6 autosamplers. Locates 96-position well plates on sample tray. Requires, but does not include the sample probe. This functionality is only supported with the ICP-MS MassHunter software.

• Unit:

  1 Kit

Well plate startup kit, for Agilent SPS 4 and SPS 6 autosamplers. Allows autosampler to sample from 96-well plates. Includes well plates, well plate adapter, sample probe. This functionality is ONLY supported with the ICP-MS MassHunter software.

• Unit:

  1 Kit

SPS 4 probe 0.25 mm id with red markers. Inert, FEP sleeved, for SPS 4 autosampler. Compatible when using the SPS 4 autosampler with ICP-MS instruments.

• Unit:

  1 Each

SPS 4 probe 0.5 mm id with yellow markers. Inert, FEP sleeved for SPS 4 autosampler. Standard SPS4 autosampler probe for use with ICP-MS.

• Unit:

  1 Each

SPS 4 probe, 0.8 mm id, with green markers. Inert, FEP sleeved for SPS 4 autosampler. Standard SPS4 autosampler probe for Flame AAS, MP-AES and ICP-OES. Compatible when using the SPS 4 autosampler with Fame AAS, MP-AES, ICP-OES and ICP-MS...

• Unit:

  1 Each

SPS 4 probe 1.0 mm id with blue markers. Inert, FEP sleeved for SPS 4 autosampler. Compatible when using the SPS 4 autosampler with Flame AAS, MP-AES, ICP-OES and ICP-MS instruments.

• Unit:

  1 Each

Quartz connector from spray chamber to torch, with dilution port for high matrix introduction (HMI) or Option Gas (Ar/O2) addition for organics. Suitable for use with Agilent 9500 ICP-MS including with HMI aerosol dilution.

• Unit:

  1 Each

Connectors for plasma and auxiliary gas lines, for gas line connections, 1 pc of each. 90 degree gas connectors, with PTFE body and ECTFE nut. Suitable for Agilent 9500 ICP-MS.

• Unit:

  1 Each

Big universal trap, Argon, 1/8 in, 300 psig, 750 cc. Large capacity Carrier Gas or Triple Filter. Delivers faster stabilization times for increased ICP-MS productivity, removes oxygen, moisture, and hydrocarbons from the carrier gas for MS...

• Unit:

  1 Each

Obsolete. Replacement Part Number 5005-0423. Sample loop, Easy-fit, 1.00 mL volume, 80s acq. time, 1.00 mm id. Provides a typical acquisition time of 80 seconds when used for ICP-MS with ISIS 3, peristaltic pump and SPS4. Compatible with AVS MS.

• Volume:

  1 mL

• Unit:

  1 Each

Sample loop, Easy-fit, 1.50 mL volume, 145s acq. time, 1.00 mm id. Provides a typical acquisition time of 145 seconds when used for ICP-MS with ISIS 3, peristaltic pump and SPS4. Compatible with AVS MS.

• Volume:

  1.5 mL

• Unit:

  1 Each

Sample loop, Easy-fit, 2.50 mL volume, 375s acq. time, 1.00 mm id. Provides a typical acquisition time of 375 seconds when used for ICP-MS with ISIS 3, peristaltic pump and SPS4. Compatible with AVS MS.

• Volume:

  2.5 mL

• Unit:

  1 Each

Sample loop, Easy-fit, 1.00 mL volume, 80s acq. time, 2.18 mm id. Provides a typical acquisition time of 80 seconds when used for ICP-MS with ISIS 3, peristaltic pump and SPS4. Compatible with AVS MS.

• Volume:

  1 mL

• Unit:

  1 Each

Sample loop, Easy-fit, 2.00 mL volume, 260s acq. time, 2.18 mm id. Obsolete. Replaced by p/n 5005-0431. Provides a typical acquisition time of 260 seconds when used for ICP-MS with ISIS 3, peristaltic pump and SPS4. Compatible with AVS MS.

• Volume:

  2 mL

• Unit:

  1 Each