Quartz connector from spray chamber to torch, without gas port. Suitable for use with Agilent 9500 ICP-MS including with UHMI aerosol dilution

• Unit:

  1 Each

Skimmer base assembly, u-lens, stainless steel. Skimmer base, stainless steel, Standard for Agilent 9500 with u-lens ICP-MS. Use with nickel skimmer cone. Includes screws.

• Unit:

  1 Each

Grounding manifold with 2 inlets for sample and internal standard online mixing. Standard for Agilent 9500 ICP-MS.

• Unit:

  1 Pack

Grounding manifold with 1 inlet for sample. Optional configuration for Agilent 9500 ICP-MS recommended when using AVS MS or when internal standard online addition is not needed.

• Unit:

  1 Pack

Thumb screw for grounding manifold. Thumb screw for assembling the grounding manifold to the Agilent 9500 ICP-MS.

• Unit:

  1 Each

Air Inlet Duct Filter Kit. Replacement filters (2 overlayed) for the 9500 ICP-MS top cover air inlet.

• Unit:

  1 Kit

Tubing for reaction cell gas, 1/pk. Suits Agilent 9500 ICP-MS.

Tubing for external nebulization, makeup, and dilution gas, 1 each. Suitable for Agilent 9500 ICP-MS. Used to connect nebulizer, make-up, and HMI/UHMI aerosol dilution Argon gas from instrument to sample introduction components. 1 piece of tubing...

• Unit:

  1 Each

AVS MS preconfigured tubing and loop kit. Includes all tubing kits, ready for installation to AVS MS valve with the 9500 ICP-MS. Includes sample loop p/n 5005-0425, 1.5 mL, 1.00 mm id. Other sizes available to order separately.

• Unit:

  1 Kit

SimulScan dual-stage detector, for PerkinElmer NexION. Replacement detector for PerkinElmer NexION ICP-MS

• Unit:

  1 Each

Obsolete. No replacement recommendation. Babington nebulizer removal tool used with 7500 ICP-MS

• Unit:

  1 Each

Obsolete. No replacement recommendation. Platinum injector for inert torch, 1.5 mm id, for inert polypropylene sample introduction kit used with Agilent 7500 series ICP-MS.

• Unit:

  1 Each

Obsolete. No replacement recommendation. Spray chamber, polypropylene, sapphire injector tube, Agilent 7500 ICP-MS, supplied with the inert polypropylene sample introduction kit Same usage as Quartz spray chamber and is resistant to hydrofluoric...

• Unit:

  1 Each

Obsolete. No replacement recommendation. Plate bias, for Eagle Q-pole, Agilent 7500a/i/s/c/cs ICP-MS.

• Unit:

  1 Each

Obsolete. No replacement recommendation. Octopole assembly, Agilent 7500c ICP-MS. Includes cell entrance/exit without O-ring.

• Unit:

  1 Each

Obsolete. No replacement recommendation. Focus lens for Q-pole, Agilent 7500ce/cx/cs ICP-MS, with O-ring.

• Unit:

  1 Each

ISIS-DS preconfigured kit for discrete sampling including sample lines and connectors. Suitable for use with Agilent Integrated Sample Introduction System (ISIS-DS) on 7500 ICP-MS.

• Unit:

  1 Kit

Obsolete. No replacement recommendation. ICP-MS Internal Standard; Indium Standard at 100 ug/mL

• CAS#:

  7440-74-6

• Concentration:

  100 µg/mL

• Unit:

  1 Each

Obsolete. No replacement recommendation. ICP-MS internal, yttrium at 100 µg/mL

• CAS#:

  1314-36-9

• Concentration:

  100 µg/mL

• Solvent:

  Water with dilute nitric acid

• Unit:

  1 Each

Sample loop, Easy-fit, 0.25 mL volume, 15s acq. time, 1.00 mm id. Provides a typical acquisition time of 15 seconds when used for ICP-MS with ISIS 3, peristaltic pump and SPS4. Compatible with AVS MS.

• Volume:

  0.25 mL

• Unit:

  1 Each