Refine Results
- Products
-
Product Category
- Applications and Industries
-
Solution Category
- Services
- Content Type
-
Content Type
- Analysis Technique
-
- Analyzed With
-
Analyzed With
- Chemical Group
-
Chemical Group
- Compounds
-
Compounds
- Detection Technique
-
- Injection Technique
-
- Instrument
-
Instrument
- Method
-
- Agency Method
-
Agency Method
- Inner Diameter
-
Inner Diameter
- Length
-
Length
- Outer DIameter
-
Outer DIameter
- Packaging
-
Packaging
- Model
-
Model
- Solvent
-
Solvent
- Analyte
-
Analyte
- CAS Number
-
CAS Number
- Concentration
-
Concentration
- Format
-
Format
- Technique
-
Technique
- Unit Quantity
-
Unit Quantity
- Volume
-
Volume
- Analysis Platform
-
Analysis Platform
- MS Instrument Compatibility
-
MS Instrument Compatibility
- Spectroscopy Instrument Compatibility
-
Spectroscopy Instrument Compatibility
- Language
-
Language
Need help finding the right ICP supplies? Try our ICP Supplies Selector Tool.
Compare
Compare
ICP-MS checkout solution, required by Agilent installation engineer to validate Agilent 7700 performance on site. Includes tuning solution, dual mode (1), dual mode (2), wash solution, water blank solution
-
Unit:
1 Each

ICP-MS detergent for cleaning interface cones and lenses, 3.8L. Citranox detergent supplied in 3.8L (1 Gallon) bottle. Use diluted to 2% by volume with pure water for cleaning ICP-MS interface cones and lenses, typically with ultrasonication...
-
Unit:
1 Each

Compare
ICP-MS Stock Tuning Solution. Li, Y, Ce, Tl and Co
-
Component:
Lithium carbonate (ICP grade) (as lithium), 10 µg/mL;
Thallium (I) nitrate (ICP grade) (as thallium), 10 µg/mL;
, 10 µg/mL;
-
Solvent:
2% Nitric acid
-
Packaging:
100 mL Bottle
-
Unit:
1 Each

Compare
ICP-MS tuning solution. Li, Mg, Y, Ce, Tl and Co
-
Component:
Lithium carbonate (ICP grade) (as lithium), 10 µg/mL;
Thallium (I) nitrate (ICP grade) (as thallium), 10 µg/mL;
Yttrium oxide (ICP grade) (as yttrium), 10 µg/mL;
-
Solvent:
2% Nitric acid
-
Packaging:
100 mL Bottle
-
Unit:
1 Each

ICP-MS Interface cone Magnifier, 10X magnification with LED illumination and measuring scale. Ideal for inspection and measurement of the ICP-MS sampler and skimmer cone orifice. Ten times magnification with LED illumination, manual focus and +/-...
-
Unit:
1 Each

Compare
ICP-MS Internal Std Mix (100mL). ICP-MS internal standard mix (100 mL). This is a replacement for PN = 5188-6525. It replaces the Lithium 6 isotope with Beryllium.
-
Component:
Ammonium hexafluorogerminate (IV) (ICP Grade) (as germanium), 100 µg/mL;
Beryllium acetate (ICP grade) (as beryllium), 100 µg/mL;
Bismuth (ICP grade), 100 µg/mL;
-
Solvent:
10% Nitric acid
-
Packaging:
100 mL Bottle
-
Unit:
1 Bottle

PerkinElmer ICP-MS Coolant fluid, for ELAN 9000/6xX00/DRC/NexION, 1 L. General purpose coolant fluid for recirculating chiller on PerkinElmer ICP-MS systems
-
Unit:
1 Each

PerkinElmer ICP-MS Cross-Flow II replacement GemTips, PEEK, orifices color-coded, argon, 0.23 mm (0.009 inch) ruby red, sample, 0.34 mm (0.013 inch) clear sapphire. Replacement GemTips for Cross-Flow II nebulizer (8003-0483)
-
Unit:
1 Set

PerkinElmer ICP-MS End cap, for Cross-Flow II nebulizer, for all GemClean Cross-Flow II nebulizers after September 1998, for ELAN 9000/6xX00/DRC/NexION. Replacement End Cap for PerkinElmer ELAN 9000/6x00/DRC/NexION ICP-MS. Use with Cross-Flow II...
-
Unit:
1 Each

PerkinElmer ICP-MS Sample capillary, PTFE, 0.020 inch id, 0.062 inch od, for sample inlet fitting used with type A/C/K nebulizers. For use with Elan / NexION
-
Unit:
1 Each

PerkinElmer ICP-MS Obstruction removal set, for PFA nebulizers. Set for cleaning PFA nebulizer on PerkinElmer ICP-MS systems
-
Unit:
1 Set

PerkinElmer ICP-MS Capillary, PTFE, 1.0 mm id, uptake 1 mL/min, for PFA-ST nebulizer. For use with Elan / NexION
-
Unit:
1 Each

PerkinElmer ICP-MS Retaining ring, for Scott spray chamber, for ELAN 9000/6x00/5x00/DRC-e/NexION. Compatible with PFA HF-resistant Scott type spray chamber (8003-0522) on PerkinElmer ELAN 9000/6x00/5x00/DRC-e/NexION ICP-MS systems
-
Unit:
1 Each

PerkinElmer ICP-MS Support adapter, for twist-type ball-joint injector, for ELAN DRC/DRCplus/DRC II. Injector Support Adapter for Perkin Elmer ELAN DRCs ICP-MS. Use with Quartz ball joint injectors
-
Unit:
1 Each

PerkinElmer ICP-MS Support adapter, for cassette-type ball joint injector, for ELAN DRC II. Torch Injector Support Adapter for Perkin Elemer ELAN 9000/6x00/DRCs and NexION 300/350 ICP-MS. Use with Quartz ball joint injectors
-
Unit:
1 Each

PerkinElmer ICP-MS Injector support adapter, twist-type, for ELAN DRC-e/9000/6x00/5000. For corrosion-resistant torch and Ryton Scott spray chamber and twist-type torch mounts before April 2005
-
Unit:
1 Each

PerkinElmer ICP-MS Injector support adapter, twist-type, assembled with O-rings, for ELAN DRC-e/9000/6x00/5000. For corrosion-resistant torch and Ryton Scott spray chamber and twist-type torch mounts before April 2005
-
Unit:
1 Each

PerkinElmer ICP-MS Injector support adapter, for cassette-type non-ball joint injectors, for NexION/ELAN DRC-e/9000/6x00/5000/500. Torch Injector Support Adapter for Perkin Elemer ELAN 9000/6x00/DRCs and NexION 300/350 ICP-MS. Use with Non-Ball...
-
Unit:
1 Each

PerkinElmer ICP-MS Torch alignment tool, to align torch in the load coil, for NexION/ELAN 9000/6x00/DRCs. For usage with demountable quartz torches for Perkin Elmer ELAN 9000/6x00/DRCs and NexION 300/350 ICP-MS
-
Unit:
1 Each
