Looking for an Electronic Measurement Product?Visit Keysight
20 of 300 results
A quick reference to the most commonly ordered supplies and parts for the Agilent 1290 Infinity LC.
Method transfer from an 1100 Series Quaternary LC to a 1260 Infinity II LC showing equivalency for the analysis of polyphenols
Technical information about the Agilent 1260 Infinity II Isocratic Pump (G7110B), Quaternary Pump VL (G7111A), Quaternary Pump (G7111B) and Bio-inert Pump (G5654A).
Describes the required components to allow third party software to get LC data in order to simplify the development of software to control the 1290 LC.
The manual describes the Agilent Intelligent System Emulation Technology (ISET).
This book provides information about the Agilent Instant Pilot.
Information relating to what solvents may be used to flush contaminants from a liquid chromatography line.
Some tips on maintaining UV Detector flow cells.
Shows the performance of the 1290 Infinity Quaternary Pump below 5% and above 90% organic phase
1290 Infinity II LC workflow solutions for automated method development and high through-put analysis. Presentation at HPLC 2015
The Agilent 1260 Infinity II Low Dispersion Kit is for Systems with Agilent InfinityLab LC Multi Column Thermostats.
This manual contains information on the Agilent 1260 Infinity ELSD (G4260B) and the Agilent 1260 Infinity ELSD (G4260B).
See tehniline märkus kirjeldab parimaid tavasid Agilenti LC-süsteemi kasutamiseks.
To tehnično sporočilo opisuje najboljše prakse za uporabo sistema Agilent LC.
Using a focused gradient to optimize the scale-up process from an analytical UHPLC system to preparative LC system
In 2003 Agilent introduced the first commercially available porous silica columns with 1.8 μm particles. In combination with the 1260 Infinity Binary LC system these RRHT
This Technical Overview describes the easy steps to follow, from crude sample analytical scouting submission to pure target product archiving or screening.
Jet Stream proteomics uses iFunnel technology to enable the use of standard flow LC/MS