Looking for an Electronic Measurement Product?Visit Keysight
20 of 43 results
FAQ When should I use the 400-DS instead of the traditional Apparatus 7 unit. 400-DS should be used when small volumes, long run times, or use of alcoholic media is desired
400-DS Operator's Manual 70-9064
FAQ What compatibility is there with various vessel sizes. There are various sizes, see data
400 DS Dissolution Apparatus Site Preparation Checklist
FAQ How are time points programmed in the Apparatus 3 and 7. Time points are programmed independently for each row. See details
FAQ How do I perform percent dissolved calculations for the Apparatus 3 and 7 units. See detail
Information about how to clean the dissolution water bath on the 708-DS.
708-DS Dissolution Apparatus Site Preparation Checklist
FAQ Dealing with foaming in the Apparatus 3 with surfactants. Antifoaming agents can usually be used.
FAQ How can I deal with evaporative loss during long runs with Apparatus 3 and Apparatus 7. Use a top-up procedure to maintain appropriate volumes. See details
Frequently asked question for dissolution filters.
Information on how to clean the sample tube on the 708-DS and 709-DS.
FAQ Are there any recommendations for handling chewable tablets in Apparatus 3. If an abrasive force is needed, then glass beads can be placed in the inner tubes along with th
Information on how to clean and store paddles and shafts for the 708-DS and 709-DS.
BIO-DIS Reciprocating Cylinder Apparatus Site Preparation Checklist
Describes how to maintain the apparatus drive unit (head) on the 708-DS and 709-DS.
FAQ Picking an appropriate screen size for Apparatus 3 testing? Screen size may be recommended in the USP monographs for a given drug or in the FDA dissolution method database
Information on how to adjust the sampling height of the manifold on the 708-DS and 709-DS.